Versatile Rigid Heat-Resistant Material Combines Speed, Strength, Excellent Mechanical Properties for Tool-Less, Direct Production of Plastic Parts

Figure 4® PRO-BLK 10 delivers on the promise of additive manufacturing with true direct digital production of plastic parts. Go from CAD to manufacturing line in one day with tool-less, same day part production. With a fast print speed and simplified post-processing that includes a single curing cycle and single solvent cleaning, this material delivers exceptional throughput. It is a high precision resin producing parts with a smooth surface finish and sidewall quality, and has excellent mechanical properties and long-term environmental stability that brings a new level of assurance to 3D production.

  • Figure 4® PRO-BLK 10 dielectric properties

    Figure 4 PRO-BLK 10 is a rigid production material with great dielectric properties on items such as casings for circuit boards.

  • Figure 4® PRO-BLK 10: tough, rigid

    Figure 4 PRO-BLK 10 is a tough, rigid production plastic material. It creates much more robust parts such as clips and snaps.

  • Applications

    • Tool-less, same day production
    • Direct production of small black plastic parts; examples include: motor housings, connectors, snap-fits, automotive interior and other general-use parts
    • Digital production to replace injection molding or soft tooling processes

  • Benefits

    • Improved environmental stability of mechanical and performance properties over time
    • Fast throughput for part-in-hand with no secondary thermal cure required
    • Simple, single solvent cleaning
    • Excellent surface quality and repeatability
    • Accurate, low distortion material for fast first article print success

  • Features

    • Fast print speed up to 62 mm/hr at 50 micron layer thickness
    • 70 °C heat deflection temperature, 12% elongation at break
    • Durability and strength
    • UL94 HB flammability
    • Biocompatible capable per ISO10993-5 and ISO10993-10
    • Exhibits thermoplastic behavior in necking at tensile break point 

  • Key Material Properties

    The full suite of mechanical properties are given per ASTM and ISO standards where applicable. All parts are conditioned per ASTM recommended standards for a minimum of 40 hours at 23 °C, 50% RH. Material properties include physical and mechanical properties, as well as thermal, UL flammability, and electrical (dielectric strength, dielectric constant, dissipation factor, and volume resistivity).

  • Isotropic properties

    Figure 4 technology prints parts that are isotropic in mechanical properties meaning the parts printed along either the XYZ axis will give similar results. Parts do not need to be oriented to get the highest mechanical properties, further improving the degree of freedom for part orientation for mechanical properties.

Long term environmental stability

Figure 4 PRO-BLK 10 is engineered to give long term environmental UV and humidity stability. This means the material is tested for the ability to retain a high percent of the initial mechanical properties over a given period of time. This provides real design conditions to consider for the application or part. 

The charts show a sampling of the dataset. The full datasheet includes Indoor and Outdoor Stability data for Tensile Strength, Elongation at Break, Tensile Modulus and Impact Strength. Actual data value is on Y-axis, and data points are % of initial value.

  • Indoor Stability

    Tested per ASTM D4329 standard method.

    Figure 4 PRO-BLK 10 indoor elongation at break chart

  • Outdoor Stability

    Tested per ASTM G154 standard method.

    Figure 4 PRO-BLK 10 outdoor tensile strength chart

Chemical and automotive fluid compatibility

The compatibility of a material with hydrocarbons and cleaning chemicals is critical to part application. Figure 4 PRO-BLK 10 parts were tested for sealed and surface contact compatibility per ASTM D543 test conditions and per USCAR2 test conditions.  Tensile Strength (MPa) is shown below. The full datasheet includes additional data tables for Tensile Modulus, Elongation at Break and Notched Impact Strength.

  • Automotive Fluid Compatibility

    Figure 4 PRO-BLK 10 automotive fluid tensile strength chart

  • Chemical Compatibility

    Figure 4 PRO-BLK 10 chemical compatibility tensile strength chart

* Note: Not all products and materials are available in all countries – please consult your local sales representative for availability.

What's New with Figure 4?

Figure 4 Playlist 1

You might also be interested in:

Technical Specifications

  • Key Mechanical Properties

    • Fast print speed up to 62 mm/hr at 50 micron layer thickness
    • 70 °C heat deflection temperature, 12% elongation at break
    • UL94 HB flammability
    • Biocompatible capable per ISO10993-5 and ISO10993-10
    • Exhibits thermoplastic behavior in necking at tensile break point
    • Long-term indoor and outdoor environmental stability
       

    Download the material technical specifications:

    Figure 4 PRO-BLK 10 tech specs
    Figure 4 PRO-BLK 10 tech specs (A4)
  • A clip vent printed with Figure 4 Pro Black
Documents
Support

Customer Support Documentation

Find safety data sheets, user manuals, order supplies, and more

Support icon

Interested in purchasing this material?

I consent to receive 3D Systems Communications
Would you like to receive special offers, product updates, and event news from 3D Systems? By clicking "Yes", you agree to receive follow-up communications from 3D Systems or our partners. You can also choose to opt out of communications at any time. Please click here to view our Privacy Policy or click here to manage your Preferences.

Printers Compatible with this Material:

3D Systems Figure 4 high throughput plastic production system

Figure 4 Production

Industry’s first customizable, fully-integrated factory solution for direct digital production

Figure 4 Modular Upgradeable 3D Production Solution

Figure 4 Modular

Scalable, semi-automated 3D manufacturing solution designed to scale with growth

3D Systems Figure 4 Standalone 3D Printer

Figure 4 Standalone

Ultra-fast and affordable for same day prototyping and low-volume production