• Save on Tooling Costs and Time with Direct Production Plastic Parts

    Figure 4® Rigid White is a production-grade opaque white material that provides long-term environmental stability and long-lasting, clean white color. This material is recommended for use in medical, consumer goods, and industrial manufacturing applications, and other applications where a smooth surface finish, long-term indoor and outdoor stability, and biocompatible capability are needed. 

    This resin exhibits thermoplastic behavior with necking at break, making it ideal for snap-fit applications. It also features 65°C heat deflection temperature and high elongation at break. Fast print speeds and simplified post-processing enable exceptional throughput.

  • Figure 4 Rigid White video_final

    Figure 4 Rigid White is a tough, rigid production plastic material. It creates much more robust parts such as clips and snaps.

“The strength and finish of parts printed in Figure 4 Rigid White are just what we needed. It is the best opaque white additive manufacturing material and it works extremely well with our applications such as smooth nests for medical device manufacturing equipment, durable prototypes with high surface quality, and high detail. We’ve replaced other similar polymers in our operations with the Figure 4 Rigid White.”
— David Baker, President, Worxsimple, LLC

  • Applications

    • Handles and fixtures for medical applications that require biocompatibility
    • Electronics enclosures and small components or parts for devices
    • Motor housings, covers, guards, snap-fit parts, jigs, fixtures, and other functional prototyping and low volume production parts

  • Benefits

    • Good long-term environmental stability measured out to 8 years indoor and 2 years outdoor
    • Clean, long-lasting, opaque white color
    • Fast throughput to finished part; no secondary thermal cure required
    • Excellent surface quality, accuracy, and repeatability

  • Features

    • Thermoplastic behavior with necking at break
    • 65°C heat deflection temperature
    • 20% elongation at break
    • Flexural modulus of 2200MPa
    • Biocompatible-capable per ISO10993-5 and ISO10993-10
    • UL94 HB flammability
    • Print speeds up to 47 mm/hr at 50-micron layer thickness
    • Enables printing of larger, thicker geometries in Premium Plus mode 

  • Material Properties

    The full suite of mechanical properties is given per ASTM and ISO standards where applicable. All parts are conditioned per ASTM recommended standards for a minimum of 40 hours at 23 °C, 50% RH. Material properties include physical and mechanical properties, as well as thermal, UL flammability, and electrical (dielectric strength, dielectric constant, dissipation factor, and volume resistivity).

  • Isotropic properties

    Figure 4 technology prints parts that are isotropic in mechanical properties meaning the parts printed along either the XYZ axis will give similar results. Parts do not need to be oriented to get the highest mechanical properties, improving the degree of freedom for part orientation for mechanical properties.

Long term environmental stability

Figure 4 Rigid White is engineered to give long-term environmental UV and humidity stability and long-lasting clean white color. This material has been tested for its ability to retain a high percentage of its initial mechanical properties over a period of time. This test data provides real performance conditions to consider for the application or part. 

The charts show a sampling of the dataset. The full data sheet includes indoor and outdoor stability data for tensile strength, elongation at break, tensile modulus, and impact strength. The actual data value is on the Y-axis, and data points are % of the initial value.

  • Indoor Stability

    Tested per ASTM D4329 standard method.

    Figure 4 Rigid White Indoor Elongation Chart

  • Outdoor Stability

    Tested per ASTM G154 standard method.

    Figure 4 Rigid White Outdoor Tensile Strength Chart

Chemical and automotive fluid compatibility

Hydrocarbons and cleaning chemical compatibility can be critical to application compatibility. Figure 4 Rigid White parts were tested for sealed and surface contact compatibility per ASTM D543 test conditions and per USCAR2 test conditions. Notched impact strength is shown below. The full data sheet includes additional data tables for tensile strength, tensile modulus, and elongation at break.

  • Automotive Fluid Compatibility

    3d systems figure 4 rigid white automotive fluid chart tensile strength

  • Chemical Compatibility

    Figure 4 Rigid White chemical compatibility tensile strength chart

* Note: Not all products and materials are available in all countries – please consult your local sales representative for availability.

What's New with Figure 4?

Figure 4 Playlist 1

You might also be interested in:

Technical Specifications

  • Key Properties

    • Long-term indoor and outdoor environmental (UV and humidity) stability
    • Thermoplastic behavior with necking at break
    • 65 °C heat deflection temperature
    • 20% elongation at break
    • Flexural modulus of 2200 MPa
    • Isotropic properties
    • UL94 HB flammability
    • Biocompatible-capable per ISO10993-5 and ISO10993-10
    • Print speeds up to 47 mm/hr at 50 micron layer thickness
       

    Download the material technical specifications:

    Figure 4 Rigid White tech specs
    Figure 4 Rigid White tech specs (A4)
  • 3d-systems-figure-4-rigid-white-ev-accelerator-pedal-3-retouoched
Documents
Support

Customer Support Documentation

Find safety data sheets, user manuals, order supplies, and more

Support icon

Interested in purchasing this material?

I consent to receive 3D Systems Communications
Would you like to receive special offers, product updates, and event news from 3D Systems? By clicking "Yes", you agree to receive follow-up communications from 3D Systems or our partners. You can also choose to opt out of communications at any time. Please click here to view our Privacy Policy or click here to manage your Preferences.

Printers Compatible with this Material:

3D Systems Figure 4 high throughput plastic production system

Figure 4 Production

Industry’s first customizable, fully-integrated factory solution for direct digital production

Figure 4 Modular Upgradeable 3D Production Solution

Figure 4 Modular

Scalable, semi-automated 3D manufacturing solution designed to scale with growth

3D Systems Figure 4 Standalone 3D Printer

Figure 4 Standalone

Ultra-fast and affordable for same day prototyping and low-volume production